Position And Time Programming - Icom IC-M505 Instruction Manual

■ Position and time programming

A dstress call should nclude the shp's poston and tme
data. If no GPS s connected, your poston and UTC (Un-
versal Tme Coordnated) tme should be nput manually.
They are ncluded automatcally when a GPS recever
(NMEA0183 ver. 2.0 or 3.01) s connected.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Position Input," and
push [CHANNEL•ENTER].
--DSC Menu--
Select Item
˘Position Input
Individual Call
Group Call
All Ships Call
Position Request
Position Report
e The poston nformaton appears. Set your poston (lat-
tude and longtude) data by rotatng [CHANNEL].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Rotate [CHANNEL] to edt N; North lattude or S; South lattude
when the cursor s on the 'N' or 'S' poston, and W; West lon-
gtude or E; East longtude when the cursor s on the 'W' or 'E'
poston.
• Push [CLR] for 1 sec. to clear the lattude/longtude data.
• Push [CLR] to cancel and return to the DSC menu.
--DSC Menu--
Input Position
Latitude
__ __.___N
Longitude
__ __.___W
<CLR 1sec Null Data>
<CLR Exit / ENT OK>
r After settng the poston data, push [CHANNEL•ENTER]
to set the current UTC tme. Set the current UTC tme by
rotatng [CHANNEL], then push [CHANNEL•ENTER].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Push [CLR] for 1 sec. to clear the UTC tme data.
• Push [CLR] to cancel and return to the DSC menu.
--DSC Menu--
Input UTC Time
__:__
<CLR 1sec Null Data>
<CLR Exit / ENT OK>
t Push [CLR] or rotate [CHANNEL] to select "Exit," push
[CHANNEL•ENTER].
• Returns to the DSC menu.
• Repeat agan to return to the normal operaton condton.
Manually programmed poston data wll be held for 23.5
hours only.
6
DSC OPERATION
Null
Null
Null
6
21