Icom IC-M505 Instruction Manual page 44

6
DSC OPERATION
Regardless of a GPS recever (NMEA0183 ver. 2.0 or
3.01) connecton, the current poston/tme nformaton
appears n steps r and t. If the nformaton s not nec-
essary to be changed, push [CHANNEL•ENTER] or
[16•C] several tmes to skp the data nput steps.
r The poston nformaton appears. Set your poston (lat-
tude and longtude) data by rotatng [CHANNEL].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Rotate [CHANNEL] to edt N; North lattude or S; South lattude
when the cursor s on the 'N' or 'S' poston, and W; West lon-
gtude or E; East longtude when the cursor s on the 'W' or 'E'
poston.
• Push [CLR] for 1 sec. to clear the lattude/longtude data.
• Push [CLR] to cancel and return to the DSC menu.
Input Position
Latitude
__ __.___N
Longitude
__ __.___W
<CLR 1sec Null Data>
<CLR Exit / ENT OK>
t After settng the poston data, push [CHANNEL•ENTER]
to set the current UTC tme. Set the current UTC tme by
rotatng [CHANNEL], then push [CHANNEL•ENTER].
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Push [CLR] for 1 sec. to clear the UTC tme data.
• Push [CLR] to cancel and return to the DSC menu.
38
--DSC Menu--
Null
Null
--DSC Menu--
Input UTC Time
__:__
<CLR 1sec Null Data>
<CLR Exit / ENT OK>
--DSC Menu--
Position Reply Ready
<CLR Exit / ENT OK>
y Push [CHANNEL•ENTER] to transmt the poston re-
quest reply call to the selected staton.
• Your poston data s transmtted, when [CHANNEL•ENTER] s
pushed.
--DSC Menu--
Position Reply
Transmitting
Null