Dsc Operation; Mmsi Code ProgrammNg - Icom IC-M505 Instruction Manual

■ MMSI code programming
The 9-dgt MMSI (Martme Moble Servce Identty: DSC
self ID) code can be programmed at power ON.
This code programming can be performed only once.
After the code programming, it can be changed only
by your dealer or distributor.
q Turn power OFF.
w Whle pushng [MENU], turn power ON to enter MMSI
code programmng condton.
e After the dsplay appears, release [MENU].
r Push [MENU] agan to enter the DSC menu.
t R o t a t e [ C H A N N E L ] t o s e l e c t " S e t u p ," p u s h
[CHANNEL•ENTER].
--DSC Menu--
Select Item
Position Input
Received Calls
˘Set up
Exit
y Rotate [CHANNEL] to select "MMSI Check," push
[CHANNEL•ENTER].
--DSC Menu--
Set up
Add:INDV ID
Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
˘MMSI Check

DSC OPERATION

u Rotate [CHANNEL] to set the specfic 9-dgt MMSI code.
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectvely.
• Push [CLR] to cancel and return to the set up menu.
--DSC Menu--
MMSI Check
_________
<CLR Exit / ENT OK>
i After enterng the 9-dgt code, push [CHANNEL•ENTER]
to set the code.
• Returns to the set up menu.
o Push [CLR] or rotate [CHANNEL] to select "Exit," push
[CHANNEL•ENTER].
• Returns to the DSC menu.
• Repeat agan to return to the normal operaton condton.
Information for FRG version
The DSC channel group MUST be selected before enter-
ng the DSC menu. (p. 7) If other channel group s selected,
DSC operaton cannot be performed.
• You should select the DSC channel group before turnng power
OFF for enterng the MMSI code programmng condton.
6
5
6
15