Icom IC-M505 Instruction Manual page 13

D International channels
There are pre-programmed 57 nternatonal channels for the
IC-M505.
q Push [DIAL•DUAL/GRP] to select a regular channel.
w Whle pushng and holdng [H/L], push [DIAL•DUAL/
GRP] to change the channel group, f necessary.
• "INT" appears when Internatonal channel s selected.
e Rotate [CHANNEL] to select a channel.
• "DUP" appears for duplex channels.
Push +
D U.S.A. channels
(U.K. verson only)
For U.K. verson, there are pre-programmed 58 U.S.A. chan-
nels n addton to 57 Internatonal channels.
q Push [DIAL•DUAL/GRP] to select a regular channel.
w Whle pushng and holdng [H/L], push [DIAL•DUAL/
GRP] to change the channel group, f necessary.
• Internatonal and U.S.A. channels can be selected n sequence.
e Rotate [CHANNEL] to select a channel.
• "DUP" appears for duplex channels.
25W INT
DUP
TAG
34°34.506N
123°23.236W
UTC 12:00 PORT OPR
Push +
D ATIS and DSC channels
(Holland and FRG versons only)
For Holland and FRG verson, there are pre-programmed 57
ATIS and 57 DSC* channels n addton to 57 Internatonal
channels.
*FRG verson only
q Push [DIAL•DUAL/GRP] to select a regular channel.
w Whle pushng and holdng [H/L], push [DIAL•DUAL/
GRP] to change the channel group, f necessary.
• Internatonal, ATIS and DSC channels can be selected n se-
quence.
e Rotate [CHANNEL] to select a channel.
• "DUP" appears for duplex channels.
Push
1W ATIS
TAG
COMMERCIAL
ATIS channel
BASIC OPERATION
25W USA
DUP
TAG
34°34.506N
123°23.236W
UTC 12:00 PORT OPR
+
25W DSC
TAG
34°34.506N
123°23.236W
UTC 12:00 CALLING
DSC channel
3
3
7