Table of Contents
Advertisement
9-1. General Specifications
Printing method:
Print direction:
Number of head pins:
Number of print columns:
Character set:
Font configuration (ANK)
Printing width:
Print speed:
Line spacing:
Paper feed method:
Paper feed speed:
Paper specifications
Paper type:
Paper width:
Core:
Thickness
9. General Specifications
Serial impact dot matrix
Bi-directional
9 wires
42 columns
ASCII 95 characters
Extended graphics:
128 × 40 pages (Star mode)
128 × 9 pages (ESC/POS)
International characters:
46 (Star mode)
37 (ESC/POS)
7 (Half dots) × 9 or 5 × 9
63 mm (210 dots)/57 mm (190 dots)/45 mm (150 dots)
Max. 4.7 lines per sec. (76 mm paper width, 40 columns)
1/6-inch (default), n/144-inch (programmable by command)
Friction feed
Approx. 141 mm/sec.
Ordinary bond and carbonless copy paper (2P)
76±0.5 mm (3.0 inches)/57.5±0.5 mm (2.25 inches)/
69.5±0.5 mm (2.75 inches)
Note:
Roll diameter: 60 mm (2.36 inches) max. (1P)
12±1 mm (Inner dia.), 18±1 mm (Outer dia.)
Note:
Single: 0.06 mm to 0.085 mm
Copies: 1 original + 1 copy max.
Note:
Take up paper roll width
76.0 +1 -0.5 mm (3.0 inches)
69.5 +1 -0.5 mm (2.75 inches)
57.5 +1 -0.5 mm (2.25 inches)
85 mm (3.35 inches) Max. (2P)
Paper rolls with the end of the paper glued or taped to
the paper roll core or paper rolls with the end of the
paper folded can cause a paper jam.
0.05 mm to 0.08 mm thickness of each page
0.14 mm or less total thickness
Use a paper roll consisting of a top sheet that is thinner
than the bottom sheet.
– 36 –
Advertisement
Table of Contents
