General Specifications - Star SM-S230I SERIES Hardware Manual

5. General Specifications

Item
Printing Method
Characters Per Line
Character Size
Character Types
Dot Density
Printing Width
Printing Speed
Interface
Roll Paper
Barcode
Receive Buffer Size
Emulation
MSR
(Model with Card Reader)
Sensor
Battery Pack
Battery Operating Time
Battery Charger
Environmental
Requirements
Print Head Life
Drop Resistance
*1) If the quantity of data which is printed at once is more than 1M byte on Bluetooth communication, it would cause the buffer
to overflow and the data to get damaged.
*2) Under 10°C, please change Printing speed into" 50mm/s" and Density mode into "High".
Direct line thermal printing
Maximum 42 cpl
Alphanumeric characters: 9 × 24 dots, 12 × 24 dots, 8 × 16 dots
Japanese characters:
Alphanumeric characters, expanded graphic characters, JIS Level-1 Kanji Set,
JIS Level-2 Kanji Set, and special characters
203 dpi, 8 dots/mm
48 mm ( 384 dots)
80 mm/sec (default), 50 mm/sec
Bluetooth Spec.
Frequency Range
Data Transmission Rate 115200 bps Fixed
Bluetooth Data bit
Parity bit
Stop bit
SSP
USB 2.0
Thermal roll paper ( 58.0 mm wide with a diameter ø40 )
1D : EAN8, EAN13, UPC-A, UPC-E, ITF, Code39, Code93, Code128, CODABAR(NW-7)
2D : PDF417, QR Code, DATA Matrix
*1)
1MB
ESC/POS (default), Star Line
Reads ISO 7810/7811/7812 1& 2 & 3 track or JISII track.
Supports black mark sensors.
Rechargeable 7.4V DC 1100 mAh
Approximately 12 hour printing (12 receipts per hour)
Approximately 13.5 hour printing
(12 receipts per hour / auto power down mode)
Input: 100 to 250 V AC, 50 to 60 Hz
Output:8.4 VDC/0.8 A, Time required for full charge: 4 hours
*2)
Temperature
Humidity
Approximately 50 km
1.5 m *Our test procedure, not guarantee.
- 22 -
Specifications
24 × 24 dots
Bluetooth Ver. 2.1+ EDR/Class 2 (10 m)
2.4 GHz ISM BAND
8 Data bit Fixed
No Parity Fixed
1 Stop bit Fixed
Incompatible
-5 °C to 50 °C (for operation)
-20 °C to 60 °C (for storage)
30 % to 80 % (for operation)
10 % to 90 % (for storage)