5-2. Loading the paper roll
1 Open the printer cover by pulling the cover open
lever towards you.
CAUTION
Do not touch the print head immediately
after printing as it can be extremely hot.
On the auto cutter model, there is a paper cutter
at the paper outlet slot. Never allow your hand to
come in contact with the cutter blade.
2 Load the paper roll in the direction as shown, and
pull approximately 30 cm of the leading edge
towards you.
3 Pull the two sheets of the paper roll towards you
as shown, and close the platen arm.
– 16 –
Platen arm
Printer cover