Memory Configuration - Supermicro X10SLH-LN6TF User Manual

Table of Contents

Chapter 4: AMI BIOS

Run-time C7 Allowed

Select Enabled for Run-time C7 support, which will allow the CPU to enter the

deep sleep state while the system is in operation to reduce power consumption.

(Note: Please be sure to restore the default settings and save appropriate end-

point settings for all components associated with this feature before you enable

it.) The options are Enabled and Disabled.

Detect Non-Compliance Device

This feature detects non-compliance PCI-Express devices. The options are

Enabled and Disabled.

Program PCI-E ASPM After OpROM

PCI-E ASPM, Active State Power Management, is a power management pro-

tocol used to manage power consumption of serial-link devices installed on

PCI-Exp slots during a prolonged off-peak time. If this item is set to Enabled,

PCI-E ASPM will be programmed after the OpROM. If this item is set Disabled,

the PCI-E ASPM will be programmed before OpROM. The options are Enabled

and Disabled.

CPU SLOT6 PCI-E 3.0 X8 (IN X16) - ASPM

Use this feature to control the Active State Power Management support for the

PEG device. The options are Disabled, Auto, ASPM L0s, ASPM L1, and ASPM

L0sL1.

DMI Link ASPM Control

Use this feature to enable or disable the control of the Active State Power

Management on the SA side of the DMI Link. The options are Disabled, L0s,

L1, and L0sL1.

PCH DMI Link ASPM Control

Use this feature to control the Active State Power Management on both NB side

and SB side of the DMI Link. The options are Disabled and Enabled.

PCH SLOT4 PCI-E 2.0 X4 (IN X8) - ASPM

Use this feature to set the Active State Power Management level. The options

are Disabled, L0s, L1, L0sL1, and Auto.