Security Settings; Password Check; Administrator Password - Supermicro X10SLH-LN6TF User Manual

4-6

Security Settings

This menu allows the user to configure the following security settings for the
system.
• If the Administrator password is defined ONLY - this controls access to the
BIOS setup ONLY.
• If the User's password is defined ONLY - this password will need to be entered
upon each system boot, and will also have Administrator rights in the setup.
• Passwords must be at least 3 and up to 20 characters long.

Password Check

Select Setup for the system to check for a password at Setup. Select Always for the
system to check for a password at bootup or upon entering the BIOS Setup utility.
The options are Setup and Always.

Administrator Password

Press Enter to create a new, or change an existing Administrator password.
4-31
Chapter 4: AMI BIOS