Removing Memory Modules; Memory Support; Memory Population Guidelines - Supermicro X10SLH-LN6TF User Manual

X10SLH-LN6TF User's Manual

Removing Memory Modules

Reverse the steps above to remove the DIMM modules from the motherboard.

Memory Support

Slot A1
Slot A2 (Blue Slot)
Slot B1
Slot B2 (Blue Slot)
The X10SLH-LN6TF supports up to 32GB of Unbuffered (UDIMM) DDR3 ECC
1600/1333 MHz (1.35V/1.5V) memory in four slots. Populating these DIMM mod-
ules with a pair of memory modules of the same type and same size will result
in interleaved memory, which will improve memory performance. Please refer to
the table below:

Memory Population Guidelines

Please follow the table below when populating the X10SLH-LN6TF.
DIMM Slots per DIMMs Populat-
Channel ed per Channel
2
2
Notes:
•
Be sure to use memory modules of the same type, same speed, same
frequency on the same motherboard. Mixing of memory modules of dif-
ferent types and speeds is not allowed.
•
Due to memory allocation to system devices, the amount of memory that
remains available for operational use will be reduced when 4 GB of RAM
is used. The reduction in memory availability is disproportional. See the
following table for details.
Towards the CPU
Towards the edge of the motherboard
DDR3 Unbuffered ECC (UDIMM) Memory
DIMM Type
1 Unbuffered
DDR3
2 Unbuffered
DDR3
POR Speeds
1333, 1600
1333, 1600
2-14
Ranks per DIMM (any
combination)
Single Rank, Dual Rank
Single Rank, Dual Rank