Transmission Fluid - CanyCom BP416 Operator's Manual

3560M-0704-020
Drain plug
3560M-0704-030
Maintenance

7.4.2 Transmission Fluid

Inspection/Adding
1. Remove the fluid filler plug.
2. Visually check the transmission fluid level and the
Fluid filler plug
3. Replace the fluid filler plug.
Changing
1. Prepare a suitable container to catch the drained fluid.
2. Remove the drain plug to drain the fluid.
Note:
Fluid will drain faster with fluid filler plug removed.
Avoid contact with high temperature oil to avoid burns.
3. Replace the drain plug.
4. Open the fluid filler plug, and add the specified fluid.
– 26 –
condition of dirt in the fluid. If the level is low, add
transmission fluid. If the fluid is extremely dirty,
change the fluid.
Oil to use: See page 24.
CAUTION
NOTICE
Dispose of the drained oil properly.
(See items "Inspection" and "Adding" above.)