Table of Contents
Advertisement
Recording (continued)
Motion detection settings
Based on the motion detection conditions, the recorder
starts alarm recording when it detects variation in motion in
the image captured by the connected camera. You can set
2 patterns of motion detection conditions. (MD-A/MD-B)
1 Press the SET UP button on the front panel of
Step
the recorder or left-click the mouse.
<Main menu> is displayed.
•
2 Select [Recording setting].
Step
Recording setting
The <Recording setting> screen is displayed.
•
3 Select [Setting] next to [Manual setting].
Step
Setting
The <Recording settings> screen is displayed.
•
4 Select [Setting] next to [Motion detection].
Step
Setting
The <Motion detection setting> screen is displayed.
•
5 Select a camera used for motion detection in
Step
[Camera selection].
1
You can make motion detection settings for each
•
camera.
Notice
•
The motion detection function does not work while the
Motion detection setting screen is displayed.
62
<Motion detection>
Variation in motion
Alarm recording
Alarm recording
is detected.
starts.
starts.
or
6 Set the detection sensitivity to variation in the
Step
loaded image.
High
The detection sensitivity has 5 levels according to
•
the variation in brightness.
Tips
•
When the sensitivity is set to [High], the motion
detection function may detect even flickering of the
fl uorescent light, etc.
7 Set the motion detection threshold.
Step
0
0 5
Set the motion detection threshold (or the minimum
•
number of cells to the number of active cells in the
detection area) for starting the motion detection
operation.
The motion detection function activates when it
•
detects variation exceeding the threshold.
Notice
•
You can set the number of active cells in the detection
area at the maximum in [MD threshold]. When you set
a value exceeding that number, it turns to red. In this
case, decrease the value.
8 Set the detection interval.
Step
0.5sec
You can select the detection interval. By setting
•
the detection interval, the motion detection detects
objects that move fast and slowly separately. For
effective detection, set the interval long for objects
that move slowly and set it short for objects that
move fast.
9 Set the detection area.
Step
When you select [Setting] next to [Mask set], the
•
screen for setting the detection area is displayed.
Setting
[All area]: The setting screen is displayed with all
the cells in the detection area set active.
[No area]: The setting screen is displayed with all
the cells in the detection area set inactive.
[User A], [User B]: The setting screen is displayed
with the current detection area setting maintained.
[Copy Setting B], [Copy Setting A]: The setting
screen is displayed with the detection area setting of
the other pattern. The settings made in this step are
saved as [User A] or [User B].
Display the desired setting pattern and select
•
[Execute]. The setting screen is displayed.
You can set any of 418 cells in the detection area.
•
Active cells are indicated in red, inactive cells are
•
indicated in blue, and cells being set are colorless.
Advertisement
Table of Contents
Troubleshooting
