Error Indications; Warning Indication And Call-Out Signal Output - Mitsubishi Electric DX-TL5716U Installation Manual

Error indications

When an error occurs in the recorder, it indicates the error by 2 methods as described below.
• Information .................When an error occurs, "Please push the [HELP] button" is displayed on the screen. When you press
• Warning ......................When an error occurs, "Please push the [HELP] button" is displayed on the screen. When you press
When the menu is not displayed
"Please push the [HELP] button" is displayed.
HELP button on the front panel
Tips
• The recorder retains and displays the past 16 information/warning events. The older events are cleared and the call-out
signal output is canceled.
• When an operation error involving reboot of the recorder such as LOG14
a call-out signal is output from the CALL OUT terminal. After that, the recorder prepares for reboot and the call-out
signal output ceases. However, the call-out signal is output again after the recorder reboots (LOG5100). In this case,
the call-out signal output stops when you clear the warning indication.
Call-out signal output
No call-out signal output
Recording operation error
(LOG14 ) occurs.
134
the HELP button, the information screen is displayed.
To clear the information screen, press the HELP/WARNING RESET button on the front panel of the
recorder or the [X] button on the information screen.
the HELP button, the details of the error are displayed.
The recorder outputs a call-out signal or sounds a buzzer depending on the warning event.
( Pages 105 and 106)
To clear the indication, press the HELP/WARNING RESET button on the front panel of the recorder
or the [X] button on the warning indication. When you clear the warning indication, the buzzer and
the call-out signal output stop.
Error occurs.
Warning/Information is displayed.
Warning/Information is cleared.

Warning indication and call-out signal output

Prepare Execute reboot.
for reboot. LOG5100
When the menu is displayed
ALERT indicator on the front panel of the recorder blinks.
Close the menus.
HELP button on the front panel
HELP button on the front panel
or X button on the screen
occurs while the call-out output is enabled,
Warning
cleared.