Troubleshooting
Checking the status of the recorder
This recorder uses many electronic parts and HDDs and
malfunction may occur in them. By checking the status of
the recorder (faulty or normal) using the self-check function,
you can find a malfunction, if any, at an early stage and
prevent the recorder from remaining faulty.
Display the self-check menu.
Check the live image display.
Play back the recorded images.
Check the recorded images.
Detect HDDs.
Check the HDD detection list.
1 Press and hold down the HELP button on the
Step
front panel of the recorder for 5 seconds or
longer.
The <Self-check> menu is displayed and a 16-split
•
screen is displayed.
When the power of the recorder is off, playback
•
operations or the HELP button is locked (
117 to 120), or a menu is being displayed, you
cannot execute the self-check.
2 Check the live image display.
Step
Check that the live images from all cameras are
•
displayed.
Select [Yes] when they are displayed, and select [No]
•
when not. When you select [No], the HELP menu is
displayed.
Tips
•
To cancel the self-check halfway, press the HELP
button on the front panel of the recorder.
130
<Self-check>
1
step
2
step
step
3
step
4
step
5
step
6
step
7
Finish
step
3 Play back the recorded images.
Step
When you select [Execute], the latest image of the
•
selected playback device is displayed. To change
the playback device, select the desired device in [Play
device].
4 Check the recorded images.
Step
Select [Yes] when the recent images are played,
•
and select [No] when not. When you select [No], the
HELP menu is displayed.
To play back data stored in other device, select
•
[Return] to display the previous screen, select the
desired device in [Play device], and then select
[Execute].
Notice
•
When resent images are not recorded or recording
has not been made frequently, an image recorded in
the past may be played back.
5 Detect the connected HDDs.
Step
When you select [Yes], information on the connected
•
HDDs is displayed.
6 Check the HDD detection status.
Step
Select [Yes] when all the connected HDDs are
•
displayed, and select [No] when not. When you
select [No], the HELP menu is displayed.
7 Select [Finish] to exit the self-check.
Step
The recorder returns to the status before the self-
•
check was executed.
pages