Table of Contents
Advertisement
Displaying the system log
Displaying the system log
You can display the count, dates and times of occurrence of
system log events.
1 Press the SET UP button on the front panel of
Step
the recorder or left-click the mouse.
<Main menu> is displayed.
•
2 Select [Information].
Step
Information
The <Recorder information> screen is displayed.
•
3 Select [Confi rm] next to [Log list].
Step
Confirm
The <Log list> screen is displayed.
•
Up to 10000 events are registered. Events exceeding
•
10000 are registered, overwriting the existing events
from the oldest.
Tips
•
When an error or failure occurs while the log list is
being displayed, close the log list and display it again.
The error or failure is added to the list.
•
The log of recording start operation (such as [REC
ON]) is not registered after recovery from a power
failure.
•
Items displayed in the log list
<Error log> .............................. LOG
<Operation log>
Recording (recorder) ............... REC ON/REC OFF
Recording (rear terminal) .......... R E C E X T O N / R E C
Recording (communication) ..... R E C C O M O N / R E C
Simple lock status ..................... PS-E
Password lock status ................ PS-1, PS-2, PS-3
Lock disabled ............................ PS-OFF, PS-4
Alarm recording prohibited ....... ALM OFF
Alarm recording allowed ........... ALM ON
Power failure ............................. P-LOSS
Reset ........................................ SYS RST
Communication ......................... Name of log-in user
Menu loading ............................ MENU LOAD
Menu change ............................ MENU CHANGED
Timer on .................................... TIMER ON
Timer off .................................... TIMER OFF
Warning reset ........................... WNG RESET
Self-check ................................. SELF-CHECK
or
Pages 134 to 137.
EXT OFF
COM OFF
Others
125
Advertisement
Table of Contents
Troubleshooting
