Table of Contents
Advertisement
7 [MD] (
page 56)
Step
[ON]: Alarm recording by motion detection is
performed during timer recording.
[OFF]: Alarm recording by motion detection is not
performed during timer recording.
Notice
•
For example, when you select [REC A] in step 6
and set [MD] to [ON] in step 7, the motion detection
operation is performed by the trigger of Recording A.
When the trigger for starting alarm recording is [EXT],
motion detection recording is not performed by timer
recording even when [MD] is [ON]. (
•
In the case that the trigger for starting alarm recording
i s s e t t o [ E X T & M D - A ] o r [ E X T & M D - B ] o n t h e
<Recording setting> screen, when you set [MD] to
[OFF] on the Timer setting screen, alarm recording is
not performed even though the ALARM IN terminal is
grounded.
8 Set special days.
Step
• When you select [Setting], the screen for setting
special days and holidays is displayed.
Setting
When you select [SPL] in the [Day] column in step 4,
•
the period designated in this step is applied.
You can set up to 3 patterns of special days.
•
9 Set holidays.
Step
You can designate dates to be considered as
•
holiday.
When you select [Holiday] in the [Day] column in
step 4, the dates designated in this step are applied.
Notice
•
When you designate a holiday program with the end
time beyond 00:00, the recorder performs the holiday
program till the end time and then starts a normal day
program.
When you set January 1st as holiday:
Example
January 1st 07:00 - January 2nd 06:00
January 2nd 06:00 - Normal day program
January 1st
January 2nd
00:00
07:00
00:00
Holiday program
page 58)
Holiday program
06:00
Normal day program
•
In the case that a normal day program and a holiday
program are designed to continue beyond 00:00 (for
example, 20:00 to 07:00) and the end time of the
holiday program is within the recording period of the
normal day program, the recorder does not start the
normal day program. After the holiday program ends,
the recorder performs the next coming normal day
program.
To set timer recording for 24 hours a day, you are
recommended to set the program time as 00:00 to
00:00.
10 To check the timer recording settings, select
Step
[Next] on the <Timer program> screen.
D:Next
The <Program confi rmation> screen is displayed.
•
11 Close the menu screen.
Step
E:Return
12 Press the TIMER button on the front panel of the
Step
recorder.
The TIMER indicator illuminates.
•
The power turns off and the recorder enters the
•
timer recording stand-by mode. The power is turned
on about 3 minutes before the start time of timer
recording. The recording starts from the start time of
timer recording.
When the present time is within the timer recording
operation time, timer recording starts.
Timer recording and timer recording stand-by mode
•
are canceled when you hold down the TIMER button
for 2 seconds or longer.
Recording
67
Advertisement
Table of Contents
Troubleshooting
