Table of Contents
Advertisement
Covert camera
You can hide the images from the selected cameras by
covering them with blue screens. During playback, images
from the selected cameras are covered with black screens.
Example
During recording
Disable the display of the
image from the camera you
want to hide.
1 Select to display or hide the images from each
Step
camera.
When you check the boxes, images from the
•
selected cameras are displayed.
[Enable]: Images are displayed on the screen.
[Disable]: Images are not displayed on the screen
and are covered with blue screens (or black screens
during playback).
Notice
•
When you uncheck the boxes, images from those
cameras are not displayed and covered with black
screens during playback. To view playback images,
check the boxes.
•
You cannot display the image from the disabled
camera on the single screen using the alarm display
function.
Tips
•
When the image from a camera of which covert
camera setting is disabled is interrupted because of a
failure in that camera, no warning is displayed on the
screen. In addition, even when you enable the buzzer
of [No camera signal], the buzzer does not sound. No
call-out signal is output, but the event is registered in
the system log list.
•
Even when the covert camera setting of the camera
selected for recording is disabled, images from that
camera are recorded though they are not displayed on
the screen.
XGA output
Using the XGA output, you can use a PC monitor as a
surveillance monitor.
1 Select the XGA output screen format.
Step
[
A
]: Image from Output A is displayed in the
standard size.
[
]: Image from Output A is displayed on the entire
A
screen.
During playback
Step
When you enable it during
•
playback, you can view the
image.
Notice
•
Images stored in the HDD are played back repeatedly.
Step
Notice
•
[
]: Images from Outputs A and B are tiled
A
B
horizontally.
[
]: Images from Outputs A and B are arranged
A
B
diagonally.
[
B
]: Images from Outputs A and B are arranged
A
diagonally.
2 Adjust the quality of the images to be displayed.
You can set the edge enhancement to [High],
[Middle], or [Low].
[Off]: Edge enhancement is not adjusted.
Tips
The border between the background and the displayed
image may become white depending on the selected
image quality.
Settings related to playback
<Setting the playback functions>
Stop playback before making settings.
Activate repeat playback
Playback
HDD start point
When playback reaches the end of the HDD, it automatically
returns to the start point of the HDD and continues.
1 Select whether to enable or disable the repeat
playback.
When you check the box, the repeat playback is
•
enabled.
[Enable]: When playback reaches the end of
the recorded data, it automatically returns to the
beginning of the data and continues.
[Disable]: When playback reaches the end of the
recorded data, it stops.
When the playback returns to the HDD start point from
the end, the clock displayed on the screen may not be
updated for a while.
HDD end point
Others
111
Advertisement
Table of Contents
Troubleshooting
