Service Info; System Log List; Elapsed Operating Time; Disk Information - Mitsubishi Electric DX-TL4516U Installer Manual

Service Info

System Log List

This item is used to check the number, date, and time of the
system log.
System Menu
3 Service Info
1 System Log List
1. Check the system log in the <System Log List>.
step
• The <System Log List> displays up to 1000
items. When the number of items exceed this
limit, the latest 1000 items are displayed.
When a failure occurs while the <System Log List> is be-
ing displayed, exit the screen and display it again. A new
item is added to the list.
"REC ON" is registered to system log list when the record-
ing is started, but it is not registered when the recording is
resumed after a power failure.
See page 108 for the details of the listed log.
<Operational log>
Recording (front panel) .............. REC ON/REC OFF
Recording (rear panel) ............... REC EXT ON/
Recording (communication) ....... REC COM ON/
Simple lock ................................ PS-E
Password lock ............................ PS-1, PS-2, PS-3
Cancelling lock ........................... PS-OFF, PS-4
Displaying menu ........................ MENU ON
Exiting menu .............................. MENU OFF
Alarm recording disabled ........... ALM OFF
Alarm recording enabled ............ ALM ON
Power failure .............................. P-LOSS
Reset ......................................... RESET
Communication .......................... Name of log in user

Elapsed Operating Time

This item is used to check the total operating time of the
system, copy 1, or copy 2 device.
System Menu
3 Service Info
2 Elapsed Operating Time
1. Check the total operating time in the <Elapsed
step
Operating Time>.
"– – – – Hr": The device is not registered for that
group.
REC EXT OFF
REC COM OFF

Disk Information

This item is used to check the recording range of the main,
copy 1 or copy 2 device.
System Menu
3 Service Info
3 Disk Information
1 Disk Information (Main)
Disk Detailed Information (Main)
D
Disk Information
(Copy 1 - S.Bus, DVD/CD,
2 to 4
USB Mem.)
Disk Detailed Information
(Copy 1 - S.Bus, DVD/CD,
D
USB Mem.)
Disk Information
(Copy 2 - S.Bus, DVD/CD,
5 to 7
Internal)
Disk Detailed Information
(Copy 2 - S.Bus, DVD/CD,
D
Internal)
1. Select "Information" of the desired device in the
step
<Disk Information>.
"Alarm Area" appears when "Alarm Recording Area" (
page 77 "Change Partition Setting") is set to other than "0
%."
"LPA Area" appears when "Long Pre-Alarm Area" (
page 77 "Change Partition Setting") is set to other than "0
%."
2. Select "Detail" to check the detailed information of
step
the device set for each area.
• When selecting "Detail," the information such as
connection name, manufacturer, name, and size
(GB unit) of the device are displayed.
• Before checking the latest information, display
<Memory> menu during stopping recording, and
check that the device is set correctly.
System Menu
1, 2
steps
Operations
73