Hot-Swap Mobile Rack (Optional); Connecting An External Hard Drive (Optional) - Medion X50 Operating Instructions Manual

9.2.

Hot-swap mobile rack (optional)

You can connect an additional external hard drive using the hot-swap mobile rack.
PLEASE NOTE!
Please note that only the above-mentioned mobile rack may be used.
9.3.

Connecting an external hard drive (optional)

Your PC has a slot which allows you to connect the MEDION HDDrive2Go super speed external hard drive quickly and easily
via the USB 3.0 port.
As with a USB memory stick, the connection can be made while the operating system is running. The hard drive is then auto-
matically detected as removable storage and is assigned a drive letter.
PLEASE NOTE!
Please note that only the above-mentioned Medion hard drive may be plugged into the hard drive slot.
This slot is only compatible with the Medion HDDrive 2 Go super speed hard drives. All other former generation HDDrive
2Go hard drives cannot be used!
Medion HDDrive 2Go super speed hard drives are not supplied.
As soon as the hard drive is plugged into the hard drive slot, your PC will recognise it as removable storage.
ATTENTION!
To protect the connections, the plugs are fitted with dust covers which must be removed prior to use. When not in use,
the covers must always be refitted.
The Medion HDDrive 2Go super speed hard drive is available in the following sizes:
• Medion HDDrive 2Go super speed 6.35 cm/2.5" USB 3.0 hard drive and
• Medion HDDrive 2Go super speed 8.89 cm/3.5" USB 3.0 hard drive.
16 of 36