Table of Contents
Advertisement
F. Install Checklist
This standard work checklist is to be used by the installer in conjunction with, not instead of, the instructions contained in this installation manual.
Customer:
Date Installed:
Lot/Address:
Location of Appliance:
Installer:
Dealer/ Distributor Phone #:
Serial #:
Model (circle one):
WARNING! Risk of Fire or Explosion!
Appliance Install
Section 3
Appliance is leveled and chimney connector is secured to appliance.
Outside air kit installed.
Floor protection requirements have been met.
The masonry chimney is inspected by a professional and is clean or the
factory built metal chimney is installed according to the manufacturer's
instructions and clearances.
Chimney Section 4
Chimney installed, locked and secured in place with proper clearance.
Chimney meets the minimum height requirements.
Terminations installed and sealed.
Clearances Section 3
Combustible materials not installed in non-combustible areas.
Mantels and wall projections comply with installation manual requirements.
Appliance Setup Section 5
All packaging and protective materials removed.
All packaging materials are removed from inside/under the appliance.
Manual bag and all of its contents are removed from inside/under the appliance
and given to the party responsible for use and operation.
Hearth & Home Technologies recommends the following:
That this checklist remain visible at all times on the appliance until the installation is complete.
Comments: Further description of the issues, who is responsible (Installer/Builder/Other Trades, etc.) and corrective action needed:
Comments communicated to party responsible
6
Quadra-Fire • Adventure-III Installation Manual • 4083-901 • Rev B • 05/15
ATTENTION INSTALLER:
Follow this Standard Work Checklist
Adventure-III
Failure to install appliance according to these instructions can lead to a fire or explosion.
(Builder/Gen. Contractor)
YES
IF NO, WHY?
by
(Installer)
Part # 4083-982• Rev A• 03/11/15
on
(Date)
Advertisement
Table of Contents
