Install Checklist - Quadra-Fire DISCOVERY-I Installation Manual

Wood appliance automatic combustion control

Table of Contents

G. Install Checklist

This standard work checklist is to be used by the installer in conjuction with, not istead of, the instructions contained in this installation manual.

_________________________________________________________________________________

Customer:

______________________________________________________________________________

Date Installe:

______________________________________________________________________________

Lot / Address:

Location of Appliance:

___________________________________________________________________________________

Installer:

Dealer / Distributor Phone #:

___________________________________________________________________________________

Serial #:

____________________________________________________________________________________

Model:

WARNING! Risk of Fire or Exposion!

Appliance Install

Verified clearances to combustibles.

Appliance is leveled and connector is secured to appliance.

Hearth extension size/height decided.

Outside air kit installed.

Floor protection requirements have been met.

If appliance is connected to a masonry chimney, it should be cleaned and

inspected by a professional. If installed to a factory built metal chimney, the

chimney must be installed according to the manufacturer's instructions and

clearances.

Chimney

Chimney configuration complies with diagrams.

Chimney installed, locked and secured in place with proper clearance.

Chimney meets recommended height requirements (14-16 feet).

Roof flashing installed and sealed.

Terminations installed and sealed.

Clearances

Combustible materials not installed in non-combustible areas.

Verified all clearances meet installation manual requirements.

Mantels and wall projections comply with installation manual requirements.

Protective hearth strips and hearth extension installed per manual requirements.

Appliance Setup

All packaging and protective materials removed.

Firebrick, baffle and ceramic blanket installed correctly.

All labels have been removed from the door.

All packaging materials are removed from inside/under the appliance.

Manual bag and all of its contents are removed from inside/under the appliance

and given to the party responsible for use and operation.

Hearth & Home Technologies recommends the following:

•

Photographing the installation and copying this checklist for your file.

•

That this checklist remain visible at all times on the appliance until the installtion is complete.

Comments: Further description of the issues, who is responsible (Installer/Builder/Other Trades, etc.) and corrective action needed:

Comments communicated to party responsible ____________________________ by _____________________ on ___________

August 13, 2018

ATTENTION INSTALLER:

Follow this Standard Work Checklist

________________________________________________________________________

___________________________________________________________________

Failure to install appliance according to these instruction can lead to a fire or explosion.

(Builder / Gen. Contractor)

YES

IF NO, WHY?

______________________________________

7039-174K

(Installer)

(Date)

Discovery I

Table of Contents

Install Checklist - Quadra-Fire DISCOVERY-I Installation Manual

Related Manuals for Quadra-Fire DISCOVERY-I

Related Content for Quadra-Fire DISCOVERY-I

Table of Contents