Changing the DND Settings
See "Using Do-Not-Disturb (DND)" on
To turn on DND using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #. See
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
To turn off DND using Remote Programming:
Changing the Manual Call Forwarding Settings
See "Manual Call Forwarding" on
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #. See
5. Dial one of the following Call Forwarding feature codes:
6. Enter either an extension number or 8 followed by a telephone number.
To turn off Call Forwarding using Remote Programming:
Mitel
®
8520 Telephone User Guide – Issue 14, June 2010
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
password for your extension.
text (if applicable).
Follow previous steps 1 through 4, and then dial 371.
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
password for your extension.
•
355 (All)
•
356 (No answer)
•
357 (Busy)
•
358 (No Answer/Busy)
Dial 355, and then hang up.
page 47
for more information about using DND.
page 39
for details on setting up a Station
page 33
for more information about Manual Call Forwarding.
page 39
for details on setting up a Station
Call Features
Page 43