Conference Call; Handsfree Operation - Mitel 5230 User Manual

Conference Call

Note: To make a conference call with external parties, your phone must be configured
to do so by your Administrator.
To add a party to a call already in progress
1. While on a call, press the
2. Call the party you want to add to the call (use any call making feature).
3. Once you have connected with the new party, press the
connected to the call in progress.
To add a party on hold to a call in progress
1. Tap the AddHeld softkey, then tap the line icon of the call on hold. The party on hold
is connected to the conference call.
To split a conference call
Note: This feature is only available to the originator of the conference call.
1. Tap/press the Split softkey. The last party you added to the conference call is put on
hold, and you can speak privately with the original party.

Handsfree Operation

Note: To continue a call in private, simply lift the handset or enable the headset.
To make a call in handsfree mode (method 1)
1. Dial the number using the dialpad.
2. When the phone starts ringing, the
microphone is on.
To make a call in handsfree mode (method 2)
1. Tap the desired line appearance button on the PDA.
2. Dial the number using the dialpad. When the phone starts ringing, the
up to indicate the handsfree microphone is on.
To make a call in handsfree mode (method 3)
1. Press the key.
2. To use a non-prime line, tap the desired line appearance button on the PDA.
3. Dial the number using the dialpad. When the phone starts ringing, the
up to indicate the handsfree microphone is on.
key. The call is put on hold.
key lights up to indicate the handsfree
Revision B
Making and Receiving Calls
key. The call on hold is
key lights
key lights
47