Headset Operation - Mitel 5230 User Manual

5230 IP Appliance User Guide
To receive a call in handsfree mode
1. Press the
The key lights up to indicate the handsfree microphone is on.
To end a call in handsfree mode
1. Press the
to indicate the handsfree microphone is off.
To disable the handsfree microphone (muting the call)
1. While on a handsfree call, press the
the light turns off.
To re-enable the handsfree microphone
1. Press the

Headset Operation

Note: We recommend you disable your headset before removing your PDA from the
5230 IP Appliance. If you do not, you may have problems making calls without the
PDA.
Note: You can set the Headset On feature to automatically disable your headset
when you undock your PDA, but you will have to re-enable your headset the next time
you dock your PDA (see "Headset" on page 30 for more information).
To make a call using the headset
1. Put on the headset (if needed, reconnect the quick-connect plug).
2. If it is not already set, activate the headset with the Headset On Feature Key (see
"Headset" on page 30).
3. Dial the desired number.
To receive a call using the headset
1. Put on the headset (if needed, reconnect the quick-connect plug).
2. If it is not already set, activate the headset with the Headset On Feature Key (see
"Headset" on page 30).
3. Start talking to your party.
To end a call in headset mode
1. Press the
48
key. OR Tap the flashing line button (docked PDA only).
key, or the Cancel button on the PDA. The
, the
key. Your party can hear you again, and the
key, or the Cancel button on the PDA.
Revision B
key. Your party can no longer hear you, and
key turns off
light turns on.