Clear All Features Feature Key; Do Not Disturb - Mitel 5230 User Manual

5230 IP Appliance User Guide
5. In the drop-down menu, select the desired Campon setting, then tap OK:
• Camp On-Setup: used to send a Campon request.
• Call Privacy: used to silence Campon tones when on a call.
6. If desired, enter a label for this Feature Key.
7. Tap OK. Your Campon Feature Key is now available for use.

Clear All Features Feature Key

Use the Clear All Features Feature Key to cancel the following features:
• all your Call Forward settings
• all your Do Not Disturb settings
• all your Callbacks
To use the Clear All Features Feature Key
1. Start the Feature Keys application (see "Starting the 5230 PDA Phone Application" on
page 8).
2. In the Modes menu, select Run.
3. Go to the desired category page.
4. Tap the Clear All Features Feature Key. The affected features are cleared.
To program a Clear All Features Feature Key
1. Start the Feature Keys application (see "Starting the 5230 PDA Phone Application" on
page 8).
2. In the Modes menu, select Edit.
3. Go to the desired category page.
4. Tap the Feature Key you want to program as a Clear All Features.
5. In the drop-down menu, select Clear All Features, then tap OK.
6. If desired, enter a label for this Feature Key.
7. Tap OK. Your Clear All Features Feature Key is ready to use.

Do Not Disturb

When you enable Do Not Disturb, callers will get a busy tone, and a message indicating
you do not wish to be disturbed (for example, XXXX NO DIST).
To enable/disable Do Not Disturb
1. Start the Feature Keys application (see "Starting the 5230 PDA Phone Application" on
page 8).
2. In the Modes menu, select Run.
3. Go to the desired category page.
28 Revision B