Hold; Personal Speed Dial; Redial Saved Number - Mitel 5230 User Manual

5230 IP Appliance User Guide

Hold

To retrieve a call on hold from another station
• Dial the Call Hold Remote Retrieve FAC, then the number of the station that put the
call on hold.

Personal Speed Dial

You administrator can allocate you up to 100 Personal Speed Dials, in sets of 10.
To create a personal speed dial number
1. Lift the handset. OR Press the
2. Dial the Personal Speed Dial–Store FAC, then enter an index number (00 to 09 if you
have 10 speed dials, 00 to 19 if you have 20, etc.). If you enter a previously used index
number, you will overwrite its value.
3. Dial the number you want to save.
• To enter a pause, press the
• To make a pause longer, press the
4. Hang up to save the number.
Tip: Write down the index number and the name to which it corresponds, so you
don't forget it or accidentally overwrite it.
To use a personal speed dial number
1. Lift the handset. OR Press the
2. Dial the Personal Speed Dial–Invoke FAC, then enter the desired index number. The
number is dialed.

Redial Saved Number

You can save a number you dialed, then redial that number at a later time.
To save the last manually dialed number
1. Lift the handset. OR Press the
2. Enter the Save Last Number FAC. The last number you manually dialed is saved.
To redial a saved number
1. Lift the handset. OR Press the
2. Enter the Repeat Last Number FAC. The saved number is dialed.
64
key. OR Activate your headset.
key.
key as many times a needed.
key. OR Activate your headset.
key. OR Activate your headset.
key. OR Activate your headset.
Revision B