Application Modes; Quick Launch; Programming A Feature Key; Clearing A Feature - Mitel 5230 User Manual

5230 IP Appliance User Guide

Application Modes

The Feature Keys application has two operating modes:
• Edit: Used to program/edit Feature Keys. You can edit Feature Keys in offline mode.
• Run: Used to invoke features. You must be docked in a 5230 IP Appliance with the
PDA Phone application running to be in Run mode.
To change application modes
1. Start the Feature Keys application (see "Starting the 5230 PDA Phone Application" on
page 8).
2. In the Modes menu, select Edit or Run.

Quick Launch

By default, you get a feature confirmation screen when you invoke a feature. You can disable
this by selecting the Quick Launch option.
To enable/disable Quick Launch
1. Start the Feature Keys application (see "Starting the 5230 PDA Phone Application" on
page 8).
2. In the Modes menu, select Quick Launch. A check mark indicates that Quick Launch
is active.

Programming a Feature Key

See the following sections:
• "Call Forward Feature Keys" on page 18
• "Speed Dial Feature Keys" on page 22
• "Other Features Keys" on page 23

Clearing a Feature

You can erase a feature from a Feature Key. Once you've cleared a Feature Key, you cannot
use it until you reprogram it.
To clear a Feature Key
1. Start the Feature Keys application (see "Starting the 5230 PDA Phone Application" on
page 8).
2. In the Modes menu, select Edit.
3. Go to the desired category page, and tap the Feature Key you want to clear.
4. Tap Clear Feature. The Feature Key is cleared, and the current category page window
is displayed.
16 Revision B