Connecting To A Wireless Client; Wps Button - D-Link DAP-1665 User Manual

Section 5 - Connecting a Wireless Client

Connecting to a Wireless Client

WPS (Wi-Fi Protected Setup) is a simple and secure way to connect your wireless devices with the DAP-1665 when using
Repeater or Wireless Client mode. Most wireless devices such as wireless routers, media players, printers, and cameras will have
a WPS button (or a software utility with WPS). Refer to the user manual for the wireless device you want to connect to make
sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DAP-1665 for a minimum of one second.
The LED on the device will start to blink. (You can also use the WPS option
in the Wi-Fi Setup Wizard as described in the Configuration section.)
Step 2 - Within 120 seconds, press the WPS button on your wireless device.
Step 3 - Allow up to one minute to connect. When the LED stops blinking and
turns solid green, you will be connected and your wireless connection
will be secured with WPA2.
D-Link DAP-1665 User Manual

WPS Button

WPS Button
78