D-Link DAP-1620 Technical Support Setup Procedure

Hide thumbs Also See for DAP-1620:

Download this manual

How to configure DAP-1620 as Access Point with default wireless

SSID?

Note:

a) Please ensure the device LED is blinking orange colour before you do setup.

b) If it is not blinking in orange colour, follow the guide on page 3 on how to reset

the device before follow the guide to setup.

How Setup DAP-1620 as Access Point? – Goto Page 2

How to reset the DAP-1620? – Goto Page 3

Technical Support Setup Procedure

Page | 1

Page 1 Technical Support Setup Procedure How to configure DAP-1620 as Access Point with default wireless SSID? Note: a) Please ensure the device LED is blinking orange colour before you do setup. b) If it is not blinking in orange colour, follow the guide on page 3 on how to reset the device before follow the guide to setup.
Page 2 Step 2: a) Plug DAP-1620 direct to power outlet b) Connect LAN Cable from DAP-1620 to LAN port of the Router. Step 3: Click on the Computer Icon on the right bottom side of the Windows. Select the Wireless network name that was copy down.
Page 3 How to reset DAP-1620? Step 1: Plug DAP-1620 direct to power outlet. Step 2: Power on DAP-1620 and wait for 1 min. Step 3: Use a paper clip to press and hold the Reset Button for 30 second. Step 4: Wait for 2 min for the device to fully power on after reset.