1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Access Point
  5. DAP-1665
  6. Quick install manual

D-Link DAP-1665 Quick Install Manual

Wireless ac1200 dual band access point
Hide thumbs Also See for DAP-1665:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
DAP-1665
Wireless AC1200
Dual Band Access Point
Quick Install Guide

Advertisement

Table of Contents
loading

Related Manuals for D-Link DAP-1665

Summary of Contents for D-Link DAP-1665

  • Page 1 DAP-1665 Wireless AC1200 Dual Band Access Point Quick Install Guide...

  • Page 2: Package Contents

    Quick Install Guide Note: Using a power supply with a different voltage than the one included with the DAP-1665 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.

  • Page 3: Hardware Overview

    Hardware Overview Connections Use an unfolded paper clip to press and hold the reset Reset button for 10 seconds. This will reset the DAP-1665 back to the factory default settings. Connect an Ethernet-based device such as a computer, LAN Port video game console, Network Attached Storage (NAS) device, or media player.
  • Page 4 A solid green light indicates the wireless function is 5GHz Wireless LED working. The light will be off during device reboot or if the wireless radio is disabled. A solid light indicates a connection to an Ethernet- LAN LED enabled device. DAP-1665 Install Guide...

  • Page 5: What Mode Should I Use

    When in Access Point Mode, the device can either act as the wireless transmitter for your wired router or become a separate access point to expand your network. Setup instructions for Access Point Mode begin on page 8. DAP-1665 Install Guide...

  • Page 6: Repeater Mode

    Note: For best performance, place your DAP-1665 in between your router and your dead zone, making sure it’s placed in a location where the signal is still strong.

  • Page 7: Wireless Client Mode

    Network Attached Storage (NAS) device, or media player to your existing wireless network. Note: Wireless clients cannot connect to the DAP-1665 wirelessly when in this mode. Setup instructions for Wireless Client Mode begin on page 13.

  • Page 8: Installation

    Press the Power button on the back of the device. Verify that the Power LED is lit. RESET Attach one end of the included Ethernet cable to the LAN port on the back of the DAP-1665, and the other end into the Ethernet port on your wireless router.
  • Page 9 Click Launch Wireless Setup Wizard and you will be guided through the steps required to get your access point up and running. You will see the welcome screen for the Wi-Fi Connection Setup Wizard. Click Next to continue. DAP-1665 Install Guide...
  • Page 10 Enter a 2.4Ghz and 5GHz Wi-Fi Network Name and Wi-Fi Password. Click Next to continue. When setup is complete, make a note of your settings and click Save. The DAP-1665 will reboot. Your setup is complete! DAP-1665 Install Guide...
  • Page 11 WPS Button Within one minute, press and hold the WPS button on the side of the DAP-1665 for about one second. The WPS LED will blink. When the Security LED becomes a solid green, it means wireless security is enabled. Allow up to two minutes for the WPS process to complete.

  • Page 12: Connect Your Wireless Devices

    Note: For optimal performance using Repeater Mode, place your DAP-1665 in between your router and your dead zone, making sure it’s placed in a location where the signal is still strong. RESET Connect Your Wireless Devices From your wireless device go to the Wireless Utility to display the available wireless networks and select the Wi-Fi Network Name (SSID) that is located on your configuration card (ex: dlink-a8fa).
  • Page 13 Installation Wireless Client Mode Plug the supplied power adapter into your DAP-1665 and connect it to the outlet or to a surge protector. Press the Power switch on the back of the device. Verify that the Power LED is lit.
  • Page 14 IP address based on your router/network’s DHCP settings. You will need to log in to your router and view the DHCP table to see what IP address was assigned to the DAP-1665. The MAC address is printed on the label on the bottom of the device.

  • Page 15: Setup Wizard

    Click Launch Wireless Setup Wizard and you will be guided through the steps required to get your network up and running. You will see the welcome screen for the Wi-Fi Connection Setup Wizard. Click Next to continue. DAP-1665 Install Guide...
  • Page 16 Repeater or Wireless Client. Click Next to continue. Select Manual to set up your network manually. Click Next to continue. The DAP-1665 will scan for available wireless networks in your area. When the scan is complete, the next screen will display a list of available wireless networks.
  • Page 17 Username: “Admin” Password:” “ (leave the eld blank) Your device is now connected to the DAP-1665 and can connect to your wireless router. If you want to change your network settings, password, etc., follow the steps on page 14 to Configure Using a Web Browser. To connect additional devices, repeat step 1.

  • Page 18: Troubleshooting

    Visit www.java.com to download. • If you are using the DAP-1665 in Access Point Mode, verify physical connectivity between the access point and your router. The LAN LED on the device should be illuminated, indicating that a connection is established.
  • Page 19 2. What can I do if I forgot my password? If you forgot your password, you must reset the DAP-1665. Unfortunately this process will change all your settings back to the factory defaults. To reset the access point, locate the reset button (hole) on the rear panel of the unit.

  • Page 20: Technical Support

    Version 1.0 November 1, 2013 Copyright ©2013 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications.

Table of Contents