D-Link DAP-1665 User Manual page 45

Section 3 - Configuration
802.11 Mode:
Select one of the following:
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Channel Width:
Select the appropriate channel width from the drop-down
menu, either 20MHz or Auto 20/40MHz.
Security
Mode:
For information on how to set up wireless security, please refer
to "Configuring Wireless Security" on page
Check the box to enable the 5GHz wireless band. If you do not
Enable Wireless:
want to use wireless, uncheck the box to disable all wireless
functions. With wireless enabled, you may also set up a specific
schedule. You can select a schedule from the drop-down menu
or click Add New to create a new schedule.
Repeater Displays the name of the network which is to be repeated.
Network Name:
Local Wi-Fi Select a method for naming the DAP-1665's extended network:
Same as Repeater Name - The extended network will have the
Network Name:
same name (SSID) as the repeater network.
Create a New Wi-Fi Network Name - Enter a new name (SSID)
for the extended network in the field below.
802.11 Mode: Select one of the following:
802.11a Only - Select if you are using 802.11a wireless clients.
802.11n Only - Select if you are using 802.11n wireless clients.
Mixed 802.11n and 802.11a - Select if you are using a mix of
802.11n and 802.11a wireless clients.
802.11ac Only - Select if you are using 802.11ac wireless clients.
802.11ac and 802.11n - Select if you are using a mix of 802.11ac
and 802.11n wireless clients.
Mixed 802.11ac, 802.11n and 802.11a - Select if you are using
a mix of 802.11ac, 802.11n, and 802.11a wireless clients.
D-Link DAP-1665 User Manual
46.
5GHz Band
44