Bridge Mode; Advanced Wireless - D-Link DAP-1665 User Manual

Section 3 - Configuration
From this page, you can adjust the Advanced Wireless Settings. We recommend that you leave these settings at default values.
Transmit Power:
You can select the transmission power of the wireless radio from
the drop-down menu.
WMM Enable:
Check the box to enable Wireless Multimedia (WMM), a
QoS engine which can help to reduce lag and latency when
transmitting multimedia over your wireless connection.
Short GI:
Enabling a short Guard Interval (GI) can increase throughput.
However, it can also increase error rate in some installations, due
to increased sensitivity to radio-frequency reflections. Select
the option that works best for your installation.
IGMP Snooping:
Enabling this option allows the access point to listen for Internet
Group Management Protocol (IGMP) traffic, which can help to
detect clients which require multicast streams.
WLAN Partition:
Enabling this option means that connection wireless clients will
not be able to communicate with one another, but will still have
access to network resources such as the Internet.
HT 20/40
Enabling this option will reduce interference from other wireless
Coexistance:
networks in your area. If the channel width is operating at
40 MHz and there is another wireless network's channel over-
lapping and causing interference, the router will automatically
change to 20 MHz.
Click Save Settings at the top of the page to save the current
configuration.
D-Link DAP-1665 User Manual

Bridge Mode

Advanced Wireless

58