Access Point Mode Installation; Repeater Or Wireless Client Mode Installation - D-Link DAP-1665 User Manual

Section 2 - Installation
Plug the supplied power adapter into your DAP-1665 and connect it to the outlet or surge protector. Press the Power button on the back of the
1
device. Verify that the Power LED is lit.
Attach one end of the included Ethernet cable to the LAN port on the back of the DAP-1665, and the other end into the Ethernet port on your
2
wireless router.

Repeater or Wireless Client Mode Installation

Find an available power outlet near your wireless router. Plug the supplied power adapter into your DAP-1665 and connect it to the outlet or to a
1
surge protector. Press the Power button on the back of the device. Verify that the Power LED is lit.
D-Link DAP-1665 User Manual

Access Point Mode Installation

RESET
LAN LAN
RESET
LAN 5V 1A
USB
WPS
1
2
LAN
3
5V 1A
4
INTERNET
POWER
12V 2A
RESET
LAN
5V 1A
18