Pcdu (Cmy) - Ricoh D117 Service Manual

Image Creation

4.7.2 PCDU (CMY)

The removal procedure of the PCDU (CMY) is same as for PCDU (K). However, it is not
necessary to release the lock lever.
1: Tension released
2: Tension applied
Check that the ITB has no tension before PCDU (CMY) replacement. Otherwise, the ITB

may be damaged.
The tension of the ITB can be released as follows.

Turn the pressure release screw [A] to the left, until the flat part of the half moon on the

screw points to the right [1].
D117/D118 4-48 SM