Removing The Status-Light Board; Prerequisites; Procedure - Dell 5000 Series Service Manual

Removing the status-light board

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
your computer, follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.

Prerequisites

1. Remove the top cover.
2. Remove the solid-state
3. Remove the wireless
4. Remove the mobile broadband
5. Remove the base frame.
6. Remove the DIP switch

Procedure

1. Remove the screws that secure the status-light board to the base frame.
2. Lift the status-light board of the base frame.
Before working inside your
After working inside your
drive.
card.
card.
board.
computer. After working inside
computer. For more safety
18
31