Removing The Dip Switch Board; Prerequisites; Procedure - Dell 5000 Series Service Manual

Removing the DIP switch board

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
your computer, follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.

Prerequisites

1. Remove the top cover.
2. Remove the solid-state
3. Remove the wireless
4. Remove the mobile broadband
5. Remove the base frame.

Procedure

1. Remove the screws that secure the DIP switch board assembly to the status-light board.
2. Lift the DIP switch board assembly of the status-light board.
28
Before working inside your
After working inside your
drive.
card.
card.
computer. After working inside
computer. For more safety
16