Replacing The Mobile Broadband Card; Procedure; Post-Requisites - Dell 5000 Series Service Manual

Replacing the mobile broadband card

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
your computer, follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.

Procedure

CAUTION: To avoid damage to the wireless card, do not place any cables under it.
1. Align the notch on the mobile broadband card with the tab on the mobile broadband slot.
2. Insert the mobile broadband card into the mobile broadband card.
3. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by
your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
4. Place the mobile broadband card bracket on the system board.
5. Replace the screws that secures the mobile broadband card and bracket to the system board.

Post-requisites

Replace the top cover.
Before working inside your
After working inside your
Antenna-cable color
white
black
computer. After working inside
computer. For more safety
11
21