Replacing The Status-Light Board; Procedure; Post-Requisites - Dell 5000 Series Service Manual

Replacing the status-light board

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
your computer, follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.

Procedure

1. Place the status-light board. on the base frame
2. Replace the screws that secure the status-light board to the base frame.

Post-requisites

1. Replace the DIP switch
2. Replace the base frame.
3. Replace the mobile broadband
4. Replace the wireless
5. Replace the solid-state
6. Replace the top cover.
Before working inside your
After working inside your
board.
card.
card.
drive.
computer. After working inside
computer. For more safety
19
33