Removing The Status-Light Board; Prerequisites; Procedure - Dell Edge Gateway 5000 Series Service Manual

Removing the status-light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the
3 Remove the
4 Remove the
5 Remove the
6 Remove the

Procedure

1 Remove the screws that secure the status-light board to the base frame.
computer. After working inside your
top cover.
solid-state drive.
wireless card.
mobile broadband
base frame.
DIP switch board.
After working inside your
card.
37