Replacing The Dip Switch Board; Procedure; Post-Requisites - Dell 5000 Series Service Manual

Replacing the DIP switch board

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
your computer, follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.

Procedure

1. Place the DIP switch board on the metal frame.
2. Replace the screws that secure the DIP switch board to the metal frame.
3. Place the DIP switch board on the status-light board.
4. Replace the screws that secure the DIP switch board to the status-light board.

Post-requisites

1. Replace the base frame.
2. Replace the mobile broadband
3. Replace the wireless
4. Replace the solid-state
5. Replace the top cover.
30
Before working inside your
After working inside your
card.
card.
drive.
computer. After working inside
computer. For more safety
17