Replacing The Wireless Card; Procedure; Post-Requisites - Dell 5000 Series Service Manual

Replacing the wireless card

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
your computer, follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.

Procedure

CAUTION: To avoid damage to the wireless card, do not place any cables under it.
1. Align the notch on the wireless card with the tab on the wireless-card slot.
2. Insert the wireless card into the wireless-card slot.
3. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by
your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
4. Replace the screws that secures the wireless card and bracket to the system board.

Post-requisites

Replace the top cover.
18
Before working inside your
After working inside your
Antenna-cable color
white
black
computer. After working inside
computer. For more safety
9