Replacing The Solid-State Drive; Procedure; Post-Requisites - Dell 5000 Series Service Manual

Replacing the solid-state drive

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
your computer, follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the hard drive.

Procedure

1. Slide the solid-state drive into the solid-state drive slot.
2. Replace the screw that secures the solid-state drive to the system base.
3. Place the solid-state drive heat shield on the system board.
4. Replace the screws that secure the solid-state drive heat shield to the system board.

Post-requisites

Replace the top cover.
Before working inside your
After working inside your
computer. After working inside
computer. For more safety
7
15