Peco 23621209 Operator's Manual page 13

AIR CLEANER RELOCATION
Step 1
: Remove air cleaner end cap and remove filter (#1).
Step 2:
Remove hoses from air cleaner and intake (#2). Remove air cleaner.
Step 3:
Remove (4) bolts from intake (#3). Remove intake and all existing mounting bracket hardware.
Step 4:
Mount air cleaner mount plate P#(B0275) to intake using (4) original bolts (#4).
Step 5:
Remount intake and air cleaner mount bracket P#(B0275) to carburetor using (4) original bolts (#5).
Step 6:
Mount air cleaner mount brace P#(B0276) to manifold using (2) original bolts (#6). Do not tighten.
Step 7:
Align holes in back of air cleaner w/ slots in air cleaner mount brace P#(B0276) and insert (2) original
bolts thru back of air cleaner mount plate P#(B0275) and tighten (#7).
Step 8:
Adjust air cleaner relocation assembly as needed to fit. Tighten (2) bolts located on manifold
and replace hoses, filter and air filter end cap as shown in Figure 3.
FIGURE 1
(#6)
(#1) Air Cleaner
End Cap
(#5) To Carburetor
FOR BOB-CAT PREDATOR PRO
(#2) Hose
(#7)
(#4)
Air Cleaner
Mount Brace
P#(B0276)
Mount Air Cleaner
To This Side
Intake
(#3)
13
FIGURE 2
Air Cleaner
Mount Plate
P#(B0275)
Mount To Manifold
FIGURE 3
Completed Assembly