Engine (Ignition) Switch (Vehicles With A Smart; Entry & Start System); Engine (Ignition) Switch (Vehicles With A Smart Entry & Start System) - Toyota Corolla Instruction Manual

Engine (ignition) switch (vehicles with a smart

entry & start system)
Performing the following operations when carrying the elec-
tronic key on your person starts the engine or changes engine
switch modes.
Starting the engine
Check that the parking brake is set.
1
Vehicles without a multi-information display

Multidrive: Check that the shift lever is set in P. Firmly depress the
2
brake pedal.
Multi-mode manual transmission: Firmly depress the brake pedal,
press the engine switch at once and shift the shift lever to N.
Manual transmission: Check that the shift lever is set in N. Firmly
depress the clutch pedal.
The smart entry & start system indicator light (green) will turn on. If the
indicator light does not turn on, the engine cannot be started.
Press the engine switch.
3
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal (Multidrive or multi-mode
manual transmission) or clutch
pedal (manual transmission) until
the engine is completely started.
Diesel engine:
engine begins starting after
goes out.
The engine can be started from
any engine switch mode.
Corolla_TMMT_EE (OM12F04E)
4-2. Driving procedures
turns on. The
197
4