Toyota Corolla Instruction Manual page 57

Key of letters inserted in the above table:
U: Suitable for "universal" category child restraint system approved
for the use in this mass group.
UF: Suitable for forward-facing "universal" category child restraint
system approved for the use in this mass group.
L1: Suitable for "TOYOTA G 0
FIXATION, BASE PLATFORM" (0 to 13 kg [0 to 28 lb.]) approved
for the use in this mass group.
L2: Suitable for "TOYOTA KIDFIX" (15 to 36 kg [34 to 79 lb.])
approved for the use in this mass group.
X: Not suitable seat position for children in this mass group.
*
1
: Adjust the front seatback to the most upright position. Move the front seat
cushion to the fully rearward.
Remove the head restraint if it interferes with your child restraint system.
Follow these procedures
• For installing a baby seat with support base
If the baby seat interferes with the seatback when latching the baby seat
into the support base, adjust the seatback rearward until there is no
interference.
• For installing a forward-facing child seat
If the seat belt shoulder anchor is ahead of the child seat belt guide,
move the seat cushion forward.
• For installing a junior seat
If the child in your child restraint system is in a very upright position,
adjust the seatback to the most comfortable position.
If the seat belt shoulder anchor is ahead of the child seat belt guide,
move the seat cushion forward.
*
2
: Remove the head restraint if it interferes with your child restraint system.
The child restraint system mentioned in the table may not be available
outside of the EU area.
Other child restraint system which is different from the system men-
tioned in the table can be used, but the suitability of the systems must
be carefully checked with the child restraint system manufacturer con-
cerned and the seller of those seats.
Corolla_TMMT_EE (OM12F04E)
1-1. For safe use
+
, BABY SAFE PLUS with SEAT BELT
57
1