Toyota Corolla Instruction Manual page 59

(1) For the child restraint system which do not carry the ISO/XX size
class identification (A to G), for the applicable mass group, the
car manufacturer shall indicate the vehicle specific ISOFIX child
restraint system(s) recommended for each position.
Key of letters inserted in the above table:
IUF: Suitable for ISOFIX forward-facing child restraint systems of uni-
versal category approved for use in this mass group.
IL1: Toyota recommend to use "TOYOTA MINI" approved for the use
in this mass group.
IL2: Toyota recommend to use "TOYOTA MIDI" approved for the use
in this mass group.
When using a "TOYOTA MINI" or "TOYOTA MIDI", adjust the support
leg and the ISOFIX connectors as follows:
Lock the support leg where 5th
1
or 6th hole can be seen.
Lock the ISOFIX connectors
2
where numbers 4 and 5 can be
seen.
IL3: Refer to the "HTS iZi Kid X3" user manual for fitment method.
X: ISOFIX position not suitable for ISOFIX child restraint systems in
this mass group and/or this size class.
*
: Remove the head restraint if it interferes with your child restraint system.
When using the right side seat for the child restraint system, do not sit
in the center seat.
The child restraint system mentioned in the table may not be available
outside of the EU area.
Other child restraint systems different from the systems mentioned in
the table can be used, but the suitability of the systems must be care-
fully checked with the child restraint system manufacturer and retailer.
Corolla_TMMT_EE (OM12F04E)
1-1. For safe use
59
1