Toyota Corolla Instruction Manual page 561

 If the tire is inflated to more than the specified air pressure
Type A

1 Disconnect the hose from the valve.
2 Install the air release cap to the end of
the hose and push the protrusion on
the air release cap into the tire valve
to let some air out.
Disconnect the hose from the valve, remove the air release cap from the
3
hose and then reconnect the hose.
4 Turn the compressor switch on and wait for several seconds, and then
turn it off. Check that the air pressure indicator shows the specified air
pressure.
If the air pressure is under the designated pressure, turn the compressor
switch on again and repeat the inflation procedure until the specified air
pressure is reached.
Type B

Press the button to let some air out.
1
2 Check that the air pressure indicator shows the specified air pressure.
If the air pressure is under the designated pressure, turn the compressor
switch on again and repeat the inflation procedure until the specified air
pressure is reached.
 The valve of a tire that has been repaired
After a tire is repaired with the emergency tire puncture repair kit, the valve
should be replaced.
Corolla_TMMT_EE (OM12F04E)
7-2. Steps to take in an emergency
561
7