Toyota Corolla Instruction Manual page 559

Turn the compressor off, then
15
press the button to release
pressure from the bottle.
Disconnect the nozzle from the valve on the tire and then pull out
16
the power plug from the power outlet socket.
Some sealant may leak when the nozzle is removed.
Install the valve cap onto the valve of the repaired tire.
17
Disconnect the hose from the
18
bottle and attach the cap to the
bottle.
Place the bottle in the original bag
and zip it.
Temporarily store the bottle and compressor in the trunk.
19
To spread the liquid sealant evenly within the tire, immediately drive
20
safely for about 5 km (3 miles) below 80 km/h (50 mph).
After driving for about 5 km (3
21
miles), stop your vehicle in a
safe place on a hard, flat sur-
face and connect the compres-
sor.
Corolla_TMMT_EE (OM12F04E)
7-2. Steps to take in an emergency
559
7