Engine (Ignition) Switch (Vehicles With A Smart Entry & Start System); Engine (Ignition) Switch (Vehicles With A; Entry & Start System) - Toyota Aygo 2020 Manual

Engine (ignition) switch (vehicles with a

smart entry & start system)
Performing the following operations when carrying the elec-
tronic key on your person starts the engine or changes engine
switch modes.
Starting the engine
 Multi-mode manual transmission
Check that the parking brake is set.
Firmly depress the brake pedal, press the engine switch once and
shift the shift lever to N. (P. 210)
The smart entry & start system indicator light (green) will turn on. If the
indicator light does not turn on, the engine cannot be started.
Press the engine switch shortly
and firmly.
When operating the engine switch, When operating the engine switch, When operating the engine switch,
one short, firm press is enough. It one short, firm press is enough. It one short, firm press is enough. It
is not necessary to press and hold
the switch.
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal until the engine is completely
started.
The engine can be started from
any engine switch mode.
AYGO_OM_Europe_OM99W80E
www.carobook.com www.carobook.com www.carobook.com www.carobook.com www.carobook.com www.carobook.com www.carobook.com www.carobook.com
4-2. Driving procedures
205
4