Toyota Corolla Instruction Manual page 464

464
6-3. Do-it-yourself maintenance
 After a fuse is replaced
 If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (P. 465)
 If the replaced fuse blows again, have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
If there is an overload in a circuit

The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
 To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use

any other object in place of a fuse.
 Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
 Do not modify the fuses or fuse boxes.
NOTICE
 Before replacing fuses
Have the cause of electrical overload determined and repaired by any
authorized Toyota dealer or repairer, or another duly qualified and equipped
professional as soon as possible.
Corolla_TMMT_EE (OM12F04E)